fits make: Toyota. year: 2010–2018.

( Brand: Strong Arm ), ( Manufacturer Part Number: 6550 ), ( Part Type: Lift ), ( Color: Black ), ( Placement On Vehicle: Left ), ( Fitment Type: Direct Replacement ), ( Vehicle Location: Liftgate ), ( Fits: Toyota 4runner 2010-2018 ), ( Other Names: Strongarm ), ( Ipn 3: 689070w091, 689080w091, 689080w101, 689070w100 )
Photos of the issues are great as well.
Depending on the application, shaft down orientation may reduce rate of gas permeation through seal, which increases usable life lift support. Some model of vehicles do not allow space for the cylinder to be reversed and this will cause a binding when door or window closes.
If the application must remain dormant then open lift supports very slowly first time they are used.
Shaft down orientation ensures that the oil is in proper location for damping to occur.
Not the number on package but actual supports.
Sensors on the door are adjusted to work in way they were programmed.
Actual compressed length 16.
Each support is tested to perform as well the original units and in many cases exceed manufactures specification. There are quite a few vendors INS that advertising the stabilise part numbers but different vendor names.
This reduces seal wear and helps to inhibit corrosion.
Installing in the opposite direction can cause them not to work properly.
No issue is too small and we ask that you before the sale gets to point where are in default.
An optimum design would permit the support to be oriented shaft down through its entire actuation. Vehicles with power openers must be installed in the same direction as they came from factory.
56 inches compressed length : 16.
This listing is for 2 supports which fit the following applications: Toyota 4RUNNER base sport utility 4-door liftgate limited sr5 trad pro trail specifications see below illustration: extended length : 22. There are several reasons for this: in order to achieve the damping or cushion at end of lift supports stroke, piston assembly inside support must travel through oil stroke.
Shaft down orientation ensures that the and sealing components are lubricated with every stroke of lift support. 31 inches force: lbs.
Qty 2 Strongarm fits with Toyota 4RUNNER 2010 to 2018 liftgate hatch lift supp limited lifetime warranty.
Some reasons why not to change the orientation of support. Shaft down is the preferred orientation for mounting a lift support.
56 actual extended length qty 2 Strongarm fits with Toyota 4RUNNER 2010 to 2018 liftgate hatch lift supp gas charged supports are energy storage devices which create force by compressing inside a cylinder.
Lift supports for other automotive applications then hood, trunk, hatch liftgate or tailgate and non-automotive applications, tonne covers, package delivery vehicles, vintage vehicles manufactured prior to 1980, all electrical types special projects are cover a period of 12 months.
Please for rates.
A the e-mail address that order was placed under. B any and all numbers or markings that are on your old supports.
Shaft end fitting: ball socket u band nylon 10mm sitting dormant for any period allows the to bind seal and eventually tear.