
( Brand: Strong Arm ), ( Manufacturer Part Number: 4648 ), ( Part Type: Lift ), ( Color: Black ), ( Placement On Vehicle: Left ), ( Fitment Type: Direct Replacement ), ( Vehicle Location: Hatchback ), ( Other Names: Strongarm )
Shaft down is the preferred orientation for mounting a lift support.
Some model of vehicles do not allow space for the cylinder to be reversed and this will cause a binding when door or window closes.
Qty 2 Strongarm 4648 rear hatch liftgate tailgate lift supports limited lifetime warranty.
Actual compressed length 11. Shaft down orientation ensures that the and sealing components are lubricated with every stroke of lift support.
Lift supports for other automotive applications then hood, trunk, hatch liftgate or tailgate and non-automotive applications, tonne covers, package delivery vehicles, vintage vehicles manufactured prior to 1980, all electrical types special projects are cover a period of 12 months. Sitting dormant for any period allows the shaft to bind seal and eventually tear.
29 actual extended length qty 2 Strongarm 4648 rear hatch liftgate tailgate lift supports gas charged are energy storage devices which create force by compressing inside a cylinder. An optimum design would permit the support to be oriented shaft down through its entire actuation.
Vehicles with power openers must be installed in the same direction as they came from factory. Some reasons why not to change the orientation of support. There are several reasons for this: in order to achieve the damping or cushion at end of lift supports stroke, piston assembly inside support must travel through oil stroke.
B any and all numbers or markings that are on your old supports.
If the application must remain dormant then open lift supports very slowly first time they are used. This reduces seal wear and helps to inhibit corrosion.
Installing in the opposite direction can cause them not to work properly.
This listing is for 2 supports which fit the following applications: Honda civic base hatchback 2-door hatch CZ DX ex LX Si VAX specifications see below illustration: extended length : 18. Sensors on the door are adjusted to work in way they were programmed.
No issue is too small and we ask that you before the sale gets to point where are in default.
Shaft down orientation ensures that the oil is in proper location for damping to occur. Each support is tested to perform as well the original units and in many cases exceed manufactures specification.
Please for rates.
Provided your original purchase was for a pair unless application only uses 1 lift support b. There are quite a few vendors INS that advertising the stabilise part numbers but different vendor names.the year, make and model of your vehicle any important details such as: convertible, with or without spoiler, anything that you think would be helpful.
Depending on the application, shaft down orientation may reduce rate of gas permeation through seal, which increases usable life lift support. Photos of the issues are great as well.
Not the number on package but actual supports.
29 inches compressed length : 11.
If this is not possible then try to install so that the shaft pointing downward in closed position.